Manual for centrios wireless speakers troubleshooting

#Manual for centrios wireless speakers troubleshooting manual#
#Manual for centrios wireless speakers troubleshooting tv#

If in doubt connect the transmitter to an alternative audio source to verify normal operation of the wireless speaker system. Once the transmitter detects the audio signal the SIGNAL LED will illuminate. Ensure that your connected audio/video equipment is switched on and is operational. If using batteries, the capacity may be too low replace with new batteries or use the supplied AC adapters. Ensure the speakers are switched on and the blue LED lights illuminate. NO SOUND Ensure the AC adapter is fully inserted into the mains plug and the power connection input is in place on both the transmitter and the speakers. To further help some common problems are also listed below. Troubleshooting Please ensure you have set-up your system using the guidelines in this manual. Walls, furniture and any other obstruction between the transmitter and speaker(s) will reduce the transmission range. Remember, the maximum range of 100 meters is in ideal conditions. The signal from the system will become weaker over longer distances and may break up.

If interference should occur (the signal cuts off or carries distortion), press the TUNE button on top of the speaker to maximize best reception. If no signal has been detected, change the channel at the rear of the transmitter and press the TUNE button once again.ДҐ Note: You should now be able you move from room to room without interference. Tuning a) Keep a distance of approximately 7 meters between speaker and transmitter, and then press the TUNE button for the speakers to find the best reception. Volume can be increased from the speaker by pressing + button or decreased by pressing the button. When the button is pressed, frequency tuning starts automatically and it stops when a signal is detected. Press the TUNE button to get the best tuning reception for the speakers. Press the POWER button on the speaker to turn on the speaker. You can switch channels for best performance in your location. If it does not, check an audio output is present.

The Signal LED on transmitter will light up. Turn on the audio source to which the transmitter is connected with. However, the unit does not recharge batteries. *Please Note you can use standard alkaline or suitable rechargeable batteries. Once sufficient signal is restored, the speakers will automatically switch on. To protect the transmitter and ensure low power consumption, the transmitter will cut off automatically if there is insufficient audio input from the source. A blue LED light will illuminate when each speaker is switched on. Switch each speaker on by pressing the Power button on top of each speaker. If using mains power, connect the supplied power adapters to the input socket at the base of each speaker, then plug into the wall socket.Д¤ 2. If using batteries, insert 6 x AA batteries into each speaker battery compartment. NB You must have a working audio output/source for the transmitter to operate correctly. Speakers can be powered by batteries (not supplied) or the supplied power adapters. Once the transmitter detects an audio signal from the source, the SIGNAL LED will illuminate. The transmitter can now be connected to audio output of a TV, Radio, CD, MP3 player ipod/iphone, Smart Phone or DVD players with the cables provided. Plug the supplied AC power adapter into a wall socket.

Plug the supplied power adaptor into the DC socket located on the rear of the transmitter. Power/Signal LED Indicator Getting Started *Keep away from water.ДЈ Setting Up The Transmitter 1. Speaker receivers receive audio from the transmitter. Transmitter connects to your audio equipment and transmits the audio signal to the speakers.

#Manual for centrios wireless speakers troubleshooting manual#

Contents 2 x Speakers 1 x Transmitter 1 x AC/DC 8V 200mA Power Adaptor for Transmitter 2 x AC/DC 9V 1.2A Power Adaptor for Speakers 1 x Audio Cable (RCA male to 3.5 mm Stereo male plug) 1 x Short 'Y-Cord' RCA Adapter Cable User s Manual Getting To Know Your Wireless Speakers 1. Auto tuning speakers will scan for best signal from receiver. Automatic level control and auto ON/OFF control. Virtually interference-free stereo quality sound reproduction. 863 MHz RF technology stereo speaker system, giving operating distance up to 100m (in ideal conditions) with no line of sight limitation. You ll be enjoying thrilling, lifelike stereo sound in minutes.

You can simply connect the system to almost any audio source such as Radio, TV, Hi-Fi, CD/MP3/DVD player without complicated wiring or installation.

#Manual for centrios wireless speakers troubleshooting tv#

1 CES25 Wireless Stereo Speaker System User Manual Please read carefully before using this equipment and retain for future useДў Introduction This wireless speaker system uses latest wireless technology that enables you to enjoy music, your audio and TV sound anywhere inside or outside* your home.